LSCT
Item N° 326617
FOOTREST FOOT PLATES HEIGHT ADJUSTMENT:
1. Take out the legrest.
2. Lift up the foot plate.
3. Unscrew the 3 screws holding the foot
plate. (See figure 160)
4. Adjust the footrest foot plate to the
desired height. (See figure 161)
(See figure 154 (table of prohibited
positions) in section «Calfrest»).
5. Re-tighten the 3 screws. ((Tightening
torque: 11.1N.m) (WARNING: it is
mendatory that there are always 3 screws
(2 at the rear and 1 on the side) to attach
the foot plate)).
Maintenance manual
Revision A
Date 25/06/2015
Figure 161
Page 66 of 93
SETTINGS:
Figure 160