Menu 15: Option Module Set-Up - Nidec Unidrive M200 User Manual

Safety Product Mechanical
information information installation
11.15

Menu 15: Option module set-up

Figure 11-25 Location of option module slot and its corresponding menu number
1. Option Module Slot 1 - Menu 15
11.15.1 Parameters common to all categories
Parameter
15.001 Module ID
15.002 Software Version
15.003 Hardware Version
15.004 Serial Number LS
15.005 Serial Number MS
15.006 Module Status
15.007 Module Reset
The option module ID indicates the type of module that is installed in the corresponding slot. See the relevant option module user guide for more
information regarding the module.
Option module ID
0
209
431
433
434
443
447
448
Unidrive M200 / M201 Control User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters
Range(
0 to 65535
00.00.00 to 99.99.99
0.00 to 99.99
0 to 999999
-2 to 3
Off (0) or On (1)
Module
No module installed
SI-I/O
SI-EtherCAT
SI-Ethernet
SI-PROFINET V2
SI-PROFIBUS
SI-DeviceNet
SI-CANopen
Running the NV Media
Optimization
motor

) Default(
Onboard Advanced
Card PLC parameters
1

)
RO Num ND NC PT
RO Ver
RO Num ND NC PT
RO Num ND NC PT
RO Num ND NC PT
RO Txt
Off (0) RW Bit
Category
Automation (I/O Expansion)
Fieldbus
Diagnostics UL Listing
Type
ND NC PT
ND NC PT
NC
123