Real Time Clock Battery Replacement - Nidec Unidrive M200 User Manual

Safety Product Mechanical Electrical Getting Basic Running the NV Media Onboard Advanced
Optimization Diagnostics UL Listing
information information installation installation started parameters motor Card PLC parameters
3.2

Real time clock battery replacement

Those keypads which have the real time clock feature contain a battery to ensure the clock works when the drive is powered down. The battery has a
long life time but if the battery needs to be replaced or removed, follow the instructions below.
Low battery voltage is indicated by low battery symbol on the keypad display.
Figure 3-7 Remote Keypad RTC (rear view)
Figure 3-7 above illustrates the rear view of the Remote Keypad RTC.
1. To remove the battery cover insert a flat head screwdriver into the slot as shown (1), push and turn anti-clockwise until the battery cover is
released.
2. Replace the battery (the battery type is: CR2032).
3. Reverse point 1 above to replace battery cover.
NOTE
Ensure the battery is disposed of correctly.
18
Unidrive M200 / M201 Control User Guide
Issue Number: 2