Nidec Unidrive M200 User Manual page 135

Safety Product Mechanical
information information installation
Trip
FI.In Firmware Incompatibility
The FI.In trip indicates that the user firmware is incompatible with the power firmware.
237 Recommended actions:
Re-program the drive with the latest version of the drive firmware for Unidrive M200, using Unidrive M Connect.
HF01 Data processing error: CPU hardware fault
The HF01 trip indicates that a CPU address error has occurred. This trip indicates that the control PCB on the drive has
failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF02 Data processing error: CPU memory management fault
The HF02 trip indicates that a DMAC address error has occurred. This trip indicates that the control PCB on the drive has
failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF03 Data processing error: CPU has detected a bus fault
The HF03 trip indicates that a bus fault has occurred. This trip indicates that the control PCB on the drive has failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF04 Data processing error: CPU has detected a usage fault
The HF04 trip indicates that a usage fault has occurred.This trip indicates that the control PCB on the drive has failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF05 Reserved
HF06 Reserved
HF07 Data processing error: Watchdog failure
The HF07 trip indicates that a watchdog failure has occurred. This trip indicates that the control PCB on the drive has failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF08 Data processing error: CPU Interrupt crash
The HF08 trip indicates that a CPU interrupt crash has occurred. This trip indicates that the control PCB on the drive has
failed. The crash level is indicated by the sub-trip number.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF09 Data processing error: Free store overflow
The HF09 trip indicates that a free store overflow has occurred. This trip indicates that the control PCB on the drive has
failed.
Recommended actions:
• Hardware fault – Contact the supplier of the drive
HF10 Reserved
HF11 Data processing error: Non-volatile memory comms error
The HF11 trip indicates that a non-volatile memory comms error has occurred. The crash level is indicated by the sub-trip
number. This trip indicates that the control PCB on the drive has failed.
Sub-trip
Unidrive M200 / M201 Control User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters
Reason
1 Non-volatile memory comms error.
2 EEPROM size is incompatible with the user firmware. Re-program drive with compatible user firmware.
Running the NV Media
Optimization
motor Card
Diagnosis
Hardware fault - contact the supplier of the drive.
Onboard Advanced
Diagnostics
PLC parameters
Recommended action
UL Listing
135