User Administration - Siemens SITOP PSU8600 Manual

Activate these options in order to protect the system against changes initiated externally.
● AR configuration locked
● DCP write protection activated
See also
Loading the configuration (commissioning) (Page 277)
7.7.7.7

User administration

You can access user administration under "HW configuration > General > User
administration".
User administration
Here, you can change the administrator password and set up the system so that guests can
access the system - and up to 14 additional user accounts with different authorization levels.
Procedure for changing the administrator password
Note
Users "admin" and "guest" are preset and cannot be deleted.
1. Select the "Hardware configuration" menu.
2. Select submenu "General > User administration".
3. Enter the new password in the editor area, in line "admin" under "Password".
4. Enter the new password again under "Confirm password".
5. Load the data to the device, see Chapter "Loading the configuration (commissioning)
(Page 277)".
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
Engineering and remote access
7.7 Web server
291