Geräte-Stammdaten-Datei (Gsd) Installieren - Siemens SITOP PSU8600 Manual

4. Select the support package that you want to install.
5. Click on "Install", and follow the instructions of the installation program. During the
installation you will be prompted to close all TIA Portal instances.
As soon as this has been realized, the installation is continued by clicking on "Continue".
6. After the Support Package has been installed, the TIA Portal is reinitialized by clicking on
"Restart".
The installed devices are imported into the module catalog and can then be integrated in the
project. You can find the SITOP PSU8600 in the hardware catalog under "Power
Supplies\SITOP PSU\PSU8600".
Note
You can find additional information on installing hardware support packages in the manual of
your STEP 7 software.
7.3.2 Geräte-Stammdaten-Datei (GSD) installieren
To use SITOP PSU8600 and the supplementary modules with STEP 7 in the TIA Portal, as
an alternative to the hardware support package (HSP) you can install the appropriate generic
station description file (GSD).
The GSD file is available through our SITOP homepage (http://www.siemens.com/sitop) or
directly at (https://support.industry.siemens.com/cs/ww/en/view/102254061).
Preconditions
● You know where the GSD file is saved.
Procedure
To install the generic station description file, proceed as follows:
1. Download the GSD file from the Internet.
2. Start STEP 7 V13 in the TIA Portal.
3. In the project view, click in the menu "Options" on "Install general station description file
(GSD)" or "Manage general station description file (GSD)".
The "Manage general station description file (GSD)" dialog is opened.
4. Select the source path under which you locally saved the GSD file that you downloaded.
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Engineering and remote access
7.3 SIMATIC STEP 7 in the TIA Portal
119