Vn Menu Screen (Startup Highlighted) - ABB PGC2000 Operation And Service Manual

5. On the VN Menu screen (see Figure 2-19), cursor to STARTUP and then press the F2 (Essential
Addresses) soft key.
Figure 2-19. VN MENU SCREEN (STARTUP HIGHLIGHTED)
6. On the VistaNET Essential Addresses screen (see Figure 2-20), enter the GCC's identification on
the Name line. This identifies the device type and location.
7. Cursor down to the Tag line and enter the GCC's tag number. This usually identifies the tap in
the process that connects to the analyzer.
8. Cursor to the Board Address line and enter the Communication Board's address.
9. Cursor to the Domain 1 line and enter your GCC's Domain 1 identification.
10. Cursor to the Domain 2 line and enter your GCC's Domain 2 identification.
11. Cursor to the VNSA Address line and enter the complete address of the VNSA serving your GCC.
12. Cursor to the Router Address line and enter the complete address of the Router serving your
GCC.
2000-OSM, F1
************
TABLES
STARTUP
TESTING
Essential
Escape Addresses
F1 F2
VN Menu **********
Access
Level
F3
Refresh
VNSA
Tables
F4
2-33