Pressure And Temperature Control Screen - ABB PGC2000 Operation And Service Manual

6. On the Pres and Temp Control screen (see Figure 8-24), cursor to PRES CONTROL and press
the F2 (Manual Pressure Control ) soft key.
Figure 8-24. PRESSURE AND TEMPERATURE CONTROL SCREEN
7. On the Manual Pressure control Mode screen (see Figure 8-25), enter the zone number of the
zone you want to calibrate.
Figure 8-25. MANUAL PRESSURE CONTROL MODE SCREEN
8-52
***** Pres and Temp Control
TEMP CONTROL
PRES CONTROL
TEMP CONFIGURATION
Manual
Escape Pressure
Control
F1
**** Manual Pressure Control Mode
Zone Config Actual
COLUMN ISO
ANALYSIS ISO
SELECTOR ISO
ANALYSIS ISO
COLUMN PROG 0.00167
Valve # : [0]
Zone # : 1
Set Point : 0.00000000
Ramp Rate : 1.0000000
VALVES : --3-5-------
Accept
Escape Control
Point
F1 F2
Pressure
Config
F2 F3
SP
0.0241 0.0000
0.360 0.0000
0.699 0.0000
0.0000 0.0000
0.0000
Time : 0125
State : Idle
Ver A
Calibrate
Zone
F3
*****
View
Alarms
F4
****
Rate
0.0000
0.0000
0.0000
0.0000
1.0000
F4
2000-OSM, F1