Tp 33: Checking Method Table Configuration - ABB PGC2000 Operation And Service Manual

5. Routine validation comparisons will help in the early detection of discrimination.

TP 33: CHECKING METHOD TABLE CONFIGURATION

Verify the method configuration tables as follows:
1. Press the F1 soft key until the Background screen is displayed (see Figure 7-11).
2. On the Background screen press the F1 (Exit to Commands) soft key.
7-26
********** B A C K G R O U N D
ABB Analytical GCC
803V029-1R (Std GCC)
**ALARM**
**ALARM** 18-JUN-2002 TUE 08:16:01
**ALARM**
Analysis Time :00114 Peaks Found:00
Cycle Time :00000 State:Idle
Current Stream :01
Purging Stream :01
Method :01
Exit Manual
To Control
Commands
F1 F2
Figure 7-11. BACKGROUND SCREEN
Remote 0.1
(C) 2001
Key Component:
none
entered
Cur Report,
Basic I/O & Alarms
Options
F3 F4
**********
2000-OSM, F1