Peak End Time Function; Peak Height Function; Peak Raw Area Function; Peak Start Amplitude Function - ABB PGC2000 Operation And Service Manual

PEAK END TIME Function

Description: Returns the end time for the peak.
Syntax: PK_END_TIME(peak%)
Comments: peak% is the peak number (1 to N_PEAKS).
Example: 0010 FOR I = 1 TO N_PEAKS
0020 LPRINT PK_END_TIME(I)
0030 NEXT I
Prints the time of each peak's end.

PEAK HEIGHT Function

Description: Returns the peak's height at crest.
Syntax: PK_HEIGHT(peak%)
Comments: peak% is the peak number (1 to N_PEAKS).
Example: 0010 FOR I = 1 TO N_PEAKS
0020 LPRINT PK_HEIGHT(I)
0030 NEXT I
Prints the corrected height of each peak.

PEAK RAW AREA Function

Description: Returns the peak's raw area.
Syntax: PK_RAW_AREA(peak%)
Comments: peak% is the peak number (1 to N_PEAKS).
Example: 0010 FOR I = 1 TO N_PEAKS
0020 LPRINT PK_RAW_AREA(I)
0030 NEXT I
Prints the uncorrected area of each peak.

PEAK START AMPLITUDE Function

Description: Returns the peak's starting amplitude.
Syntax: PK_START_AMP(peak%)
Comments: peak% is the peak number (1 to N_PEAKS).
Example: 0010 FOR I = 1 TO N_PEAKS
0020 LPRINT PK_START_AMP(I)
0030 NEXT I
Prints the amplitude at the start of each peak.

PEAK START TIME Function

Description: Returns the start time for the peak.
Syntax: PK_START_TIME(peak%)
Comments: peak% is the peak number (1 to N_PEAKS).
Example: 0010 FOR I = 1 TO N_PEAKS
0020 LPRINT PK_START_TIME(I)
0030 NEXT I
Prints the time at the start of each peak.

POST ANALYSIS ERROR ALARM Function

Description: Returns the state of GCC Post-Analysis Error Alarms.
Syntax: POSTAN_ERROR_ALARM
Example: 0010 IF POSTAN_ERROR_ALARM GOTO 100
2000-OSM, F1 10-23