Digital Board 1 Input Table - ABB PGC2000 Operation And Service Manual

2. On the first Chroma Board 1 Digital Output screen, cursor to VistaII and press the F1 (Continue)
soft key.
3. On the second Chroma Board 1 Digital Output screen (see Figure 5-9), verify each pin and
function.
*****
Pin
J15A-1 Valve
J15A-2 Valve
J15A-3 Valve
J15A-4 Valve
J15A-5 Valve
J15A-6 Valve
J15A-7 Stream
J15A-8 Stream
Figure 5-9. CHROMA BOARD DIGITAL OUTPUT SCREEN #2
4. If all entries are correct, press the F1 (Escape) soft key to return to the second Digital
Configuration screen. If there are any errors on this screen, correct the errors and then press the
F2 (Exit and Update) soft key to save the corrected data and return to the second Digital
Configuration screen.

Digital Board 1 Input Table

1. After you cursor to Digital Board 1 on the second Digital Configuration screen, press the
F2 (Edit The Input Table) soft key.
5-10
Chroma Board 1 Digital Output
Function Number State
Exit
F1 F2
#1 NO
#2 NO
#3 NO
#4 NO
#5 NO
#6 NO
#1 NO
#2 NO
More Below
F3
*****
F4
2000-OSM, F1