Printing Tables; Printing Reports; Random Stream Stepping Table - ABB PGC2000 Operation And Service Manual

6. Press the F1 soft key as necessary to return to the Background screen.

Printing Tables

1. On the Background screen, press the F1 (Exit to Commands) soft key.
2. On the Commands screen, cursor down to PRINTER and then press the F2 (Print Tables) soft
key.
3. On the Print Tables screen, cursor to the desired table and then press the F2 (Print Selected
Table) soft key. The table will print.

Printing Reports

1. On the Background screen, press the F1 (Exit to Commands) soft key.
2. On the Commands screen, cursor down to REPORTS and then press the F2 (Printer Report
Type) soft key.
3. On the Printer Report Type screen, cursor to the Type line and select the type of report print by
highlighting it.
4. Cursor to the Print line and select No if you do not want to print a report, Yes if you want to print
each time the report is created, Alarm if you want to print only when an alarm condition occurs,
Change if you want to print only when an alarm condition changes, or Freq if you want to set how
often to print a report.
5. Cursor to the Alarm Reports line and select No or Yes. Selecting No or Yes in step 4 overrides
any alarm selection.
6. Cursor to the Frequency line and select how often you want to print a report. In this usage, "1"
means the report will print every time the report occurs; "2" means it will print every other time; "3"
means it will print every third report. Selecting No or Yes in step 4 overrides any frequency
value.
7. Cursor to the Inhibit Cal/Bench Report line and select No or Yes. This selection determines
whether calibration and benchmark reports print in addition to analysis reports (Yes), or just the
analysis reports (No) will print.
8. When you have completed all entries, review the screen to verify all data. Then press the F2
(Exit and Update) soft key to save the changes, or press the F1 (Escape) soft key to retain the
original values. The printer will print the report as you have specified it.
9. Press the F1 soft key as necessary to return to the Background screen.

Random Stream Stepping Table

The Random Stream Stepping Table establishes the sequence in which the various streams are to be
analyzed, up to a maximum of 50 entries. The table lists the streams in numerical order unless the
4-29 2000-OSM, F1