Reset Time Limit Command; Sensor Alarm Function; Set Basic Alarm Function; Set Basic Component Alarm Function - ABB PGC2000 Operation And Service Manual

RESET TIME LIMIT Command

Description: Resets BASIC's time limit allowing the program more time to execute
(Sim Dis analyzers only).
Syntax: RESET_TIME_LIMIT
Example: 0010 FOR I = 1 TO 10000
0020 NEXT I
0030 RESET_TIME_LIMIT
The time limit is reset to allow the program to continue executing past the
normal time limit.

SENSOR ALARM Function

Description: Returns the state of GCC Sensor Alarms.
Syntax: SENSOR_ALARM
Example: 0010 IF SENSOR_ALARM THEN LPRINT
0020 :"ALARM"

SET BASIC ALARM Function

Description: Sets up to 16 different user-named alarms.
Syntax: SET_BASIC_ALARM(alarm%)
Comments: alarm% is the alarm number (1-16). After you set an alarm, you can assign
it a name from the Sensor screen on the analyzer.
Example: 0010 SET_BASIC_ALARM(12)

SET BASIC COMPONENT ALARM Function

Description: Sets up to eight different user-named component alarms.
Syntax: SET_BASIC_COMP_ALARM(method%,component%,alarm%)
Comments: method% is the method table (1-8).
component% is the component number.
alarm% is the alarm number (1-16). After you set an alarm, you can assign
it a name from the Sensor screen on the analyzer.
Example: 0010 SET_BASIC_COMP_ALARM(2)

SPACE Function

Description: Returns a string containing the specified number of blank characters.
Syntax: SPACE(length%)
Comments: length% is an integer from 1 to 128.
Example: 0010 LPRINT "A",SPACE(10),"B"
The following appears at the printer (has 10 spaces between letters):
A

SQUARE ROOT Function

Description: Returns the square root of a floating point expression.
Syntax: SQRT(fp!)
Comments: fp! is a floating point expression.
Example: 0010 A! = SQRT(A!*100.)
The square root of the quantity 100 times the value of floating point variable
A! is assigned to floating point variable A!.
2000-OSM, F1
B
10-31