Commands Screen - ABB PGC2000 Operation And Service Manual

2. On the Commands screen (see Figure 5-2), cursor down to TESTING/SETUP and then press the
F2 (Diagnostic Tests) soft key.
[TESTING/SETUP]
3. On the Diagnostic Tests screen (see Figure 5-3), cursor to DIAGNOSTIC TESTS and press the
F2 (ROM Checksum Test) soft key.
Figure 5-3. DIAGNOSTIC TESTS SCREEN (TESTS SELECTED)
2000-OSM, F1
***** COMMANDS
ANALYSIS CONTROL
REPORTS
TABLE EDIT
PRINTER
STORAGE & CONFIG.
NAMES
MISC.
CHROMATOGRAM STORAGE
VISTANET
Diagnostic
Exit Tests
F1 F2
Figure 5-2. COMMANDS SCREEN
***** Diagnostic Tests
[DIAGNOSTIC TESTS]
DIAGNOSTIC TOOLS
ROM
Exit Checksum
Test
F1 F2
*****
Diagnostic
Tools
F3 F4
*****
Chroma
Board
Test
F3 F4
5-3