Execute The @Remote Settings - Ricoh M160 Service Manual

2.21.2 EXECUTE THE @REMOTE SETTINGS

1. Enter the SP mode.
2. Input the Request number which you have obtained from @Remote Center GUI, and
then enter [OK] with SP5816-202.
3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.
4. Check the confirmation result with SP5816-204.
Value
0 Succeeded
Communication error (proxy
3
enabled)
Communication error (proxy
4
disabled)
Proxy error (Illegal user name or
5
password)
6 Communication error
8 Other error
Request number confirmation
9
executing
Request number error (Data is
11 already registered under this
number.)
Request number error (invalid
12
parameter)
5. Make sure that the screen displays the Location Information with SP5816-205 only
when it has been input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5816-206.
7. Check the registration result with SP5816-207.
SM
Meaning
-
Check the network condition.
Check the network condition.
Check Proxy user name and password.
Check the network condition.
See "SP5816-208 Error Codes" below
this.
Processing... Please wait.
Check the request number again.
Check the request number again.
2-81
Settings for @Remote Service
Solution/ Workaround
M160/M161