Ricoh M160 Service Manual page 739

Communication Switch 05 (SP No. 1-104-006)
No Function
Remote mode switch number
0-3
00-09 (0-9:HEX)
Communication Switch 06 - Not used (Do not change the factory settings.)
Communication Switch 07 - Not used (Do not change the factory settings.)
Communication Switch 09 (SP No. 1-104-009)
No Function
Minimum interval between
0-7
automatic dialing attempts
Communication Switch 0A (SP No. 1-104-011)
No Function
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
7 Not used
Communication Switch 0B (SP No. 1-104-012)
No Function
0-3 Not used
Printout of the message when
4 acting as a Transfer Station
0: Disabled, 1: Enabled
5 Not used
M160/M161 Fax Option
Comments
Enter the number to switch between TEL/FAX
modes using the external phone.
Comments
This value is the minimum time that the
machine waits before it dials the next
destination.
Comments
0: The transmission begins from the page
where transmission failed the previous time.
1: Transmission begins from the first page,
using normal memory transmission.
Do not change this setting.
Comments
Do not change these settings.
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in from
the Requesting Terminal.
Do not change this setting.
83
Bit Switches - 3
SM