Ricoh M160 Service Manual page 711

No Function
Action when the external
handset goes off-hook
3 0: Manual tx and rx operation
1: Memory tx and rx operation
(the display remains the same)
4 Not used
7 Not used
No Function
Country/area code for functional
settings (Hex)
00: France
01: Germany
02: UK
03: Italy
04: Austria
0-7
05: Belgium
06: Denmark
07: Finland
08: Ireland
09: Norway
0A: Sweden
M160/M161 Fax Option
System Switch 0E (SP No. 1-101-015)
0: Manual tx is possible while the external
handset is off-hook. However, manual tx during
handset off-hook may not be sent to a correct
direction. Manual tx is not possible.
1: The display stays in standby mode even
when the external handset is used, so that
other people can use the machine for memory
tx operation. Note that manual tx and rx are not
possible with this setting.
Do not change this setting.
Do not change this setting.
System Switch 0F (SP No. 1-101-016)
12: Asia
13: Japan
This country/area code determines the
14: Hong Kong
factory settings of bit switches and RAM
addresses. However, it has no effect on
15: South Africa
the NCU parameter settings and
16: Australia
communication parameter RAM
addresses.
17: New Zealand
Cross reference
18: Singapore
NCU country code:
SP No. 2-103-001 for G3-1
19: Malaysia
1A: China
1B: Taiwan
1C: Korea
55
Bit Switches - 1
Comments
Comments
SM