Ricoh M160 Service Manual page 738

Bit Switches - 3
Communication Switch 02 (SP No. 1-104-003)
No Function
Hang-up decision when a
negative code (RTN or PIN) is
3 received during G3 immediate
transmission
0: No hang-up, 1: Hang-up
4-5 Not used
7 Not used
Communication Switch 03 (SP No. 1-104-004)
No Function
Maximum number of page
0-7 retransmissions in a G3
memory transmission
Communication Switch 04 (SP No. 1-104-005)
No Function
Remote mode switch (TEL
mode)
0
0: Disable
1: Enable (Active)
Remote mode switch (FAX
mode)
1
0: Disable
1: Enable (Active)
Remote mode switch (AUTO
mode)
2
0: Disable
1: Enable (Active)
SM
Comments
0: The next page will be sent even if RTN or
PIN is received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or
if ECM is being used.
Do not change these settings.
Do not change this setting.
Comments
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Comments
Set this bit to ON when you wish to switch TEL
mode to FAX mode remotely.
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with FAX mode.
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with AUTO mode.
82 M160/M161 Fax Option