Ricoh M160 Service Manual page 539

Main SP Tables-5
5-846-062 Complexity Option 1
5-846-063 Complexity Option 2
5-846-064 Complexity Option 3
5-846-065 Complexity Option 4
5-846-091 FTP Auth Port Setting
M160/M161
[0 to 32 / 0 / 1/step]
Use this SP to set the conditions for
password entry to access the local
address book. Specifically, this SP
limits the password entry to upper case
and sets the length of the password.
C*

This SP does not normally
require adjustment.

This SP is enabled only after
the system administrator has
set up a group password policy
to control access to the
address book.
[0 to 32 / 0 / 1/step]
Use this SP to set the conditions for
password entry to access the local
C*
address book. Specifically, this SP
limits the password entry to lower case
and defines the length of the password.
[0 to 32 / 0 / 1/step]
Use this SP to set the conditions for
password entry to access the local
C*
address book. Specifically, this SP
limits the password entry to numbers
and defines the length of the password.
[0 to 32 / 0 / 1/step]
Use this SP to set the conditions for
password entry to access the local
C*
address book. Specifically, this SP
limits the password entry to symbols
and defines the length of the password.
[0 to 65535 / 3671 / 1/step]
Specifies the FTP port for getting a
C*
distribution server address book that is
used in the identification mode.
3-126 SM Appendix