Ricoh M160 Service Manual page 716

Bit Switches - 1
No Function
LS RX memory capacity
0-7 threshold setting
00-FF (0-1020 Kbyte: Hex)
No Function
RTI/CSI/CPS code display
0 0: Enable
1: Disable
2-3 Not used
SM
System Switch 1A (SP No. 1-101-027)
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
System Switch 1D (SP No. 1-101-030)
0: RTI, CSI, CPS codes are displayed on the
top line of the LCD panel during
communication.
1: Codes are switched off (no display)
Do not change these settings.
Comments

If a customer wants available memory
size to be larger, decrease this
threshold.
Comments
60 M160/M161 Fax Option