Ricoh M160 Service Manual page 113

Cause Code
-12003 Attempted registration without
-12004 Attempted setting with illegal
-12005 @Remote communication is
-12006 A confirmation request was
-12007 The request number used at
-12008
-12009 The ID2 in the NVRAM does
-12010 The certification area is not
-2385 Other error
-2387 Not supported at the Service
Error Caused
by Response
from GW URL
-2389 Database out of service
-2390 Program out of service
SM
Meaning
execution of a confirmation
and no previous registration.
entries for certification and
ID2.
prohibited. The device has an
Embedded RC gate-related
problem.
made after the confirmation
had been already completed.
registration was different from
the one used at confirmation.
Update certification failed
because mainframe was in
use.
not match the ID2 in the
individual certification.
initialized.
Center
2-83
Settings for @Remote Service
Solution/ Workaround
Perform Confirmation
before attempting the
Registration.
Check ID2 of the
mainframe.
Make sure that "Remote
Service" in User Tools is
set to "Do not prohibit".
Execute registration.
Check Request No.
Check the mainframe
condition. If the
mainframe is in use, try
again later.
Check ID2 of the
mainframe.
Initialize the certification
area.
M160/M161