Ricoh M160 Service Manual page 710

Bit Switches - 1
No Function
0 Not used
3 Not used
Dialing on the ten-key pad when
the external telephone is
4
off-hook
0: Disabled 1: Enabled
On hook dial
5
0: Disabled 1: Enabled
6-7 Not used
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
No Function
Enable/disable for direct
sending selection
2
0: Direct sending off
1: Direct sending on
SM
System Switch 0A (SP No. 1-101-011)
Do not change this setting.
Do not change this setting.
0: Prevents dialing from the ten-key pad while
the external telephone is off-hook. Use this
setting when the external telephone is not by
the machine, or if a wireless telephone is
connected as an external telephone.
1: The user can dial on the machine's ten-key
pad when the handset is off-hook.
0: On hook dial is disabled.
Do not change these settings.
System Switch 0E (SP No. 1-101-015)
Direct sending cannot operate when the
capture function is on during sending. Setting
this switch to "1" enables direct sending without
capture.
Setting this switch to "0" masks the direct
sending function on the operation panel so
direct sending with Scan Router cannot be
selected.
Comments
Comments
54 M160/M161 Fax Option