Ricoh M160 Service Manual page 533

Main SP Tables-5
5-845-008 IP Address (Secondary)
5-845-009 Delivery Server Model
Delivery Svr. Capability
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
5-845-010
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr. Capability
5-845-011
(Ext)
5-845-013 Server Scheme (Primary)
Server Port Number
5-845-014
(Primary)
5-845-015 Server URL Path (Primary)
Server Scheme
5-845-016
(Secondary)
M160/M161
[ - / - / - ]
Sets the IP address that is given to the
computer that is the secondary delivery
C*
server for Scan Router. This SP lets
you set only the IP address, and does
not refer to the DNS setting.
[0 to 4 / 0 / 1/step]
Allows changing the model of the
C*
delivery server registered by the I/O
device.
C* [0 to 255 / 0 / 1/step]
[- / 00000000 / -]
C*
Not in use. Reserved for SP5845-010.
[ Up to 6 char / - / -/step]
C* This SP is used for the scan router
program.
[1 to 65535 / 80 / 1/step]
C* This SP is used for the scan router
program.
[ Up to 16 byte / - / -/step]
C* This SP is used for the scan router
program.
[ Up to 6 char / - / -/step]
C* This SP is used for the scan router
program.
3-120 SM Appendix