Ricoh M160 Service Manual page 695

Check Point
7 Enable H.323/Enable SIP SW is set to on? Request the sender to check the
8 Local fax IP address registered?
9 Local fax Alias number registered?
10 Network bandwidth too narrow?
11 Remote fax cancelled transmission?
12 Local fax registered in Gatekeeper/SIP
server?
M160/M161 Fax Option
Action
settings.
User Parameter SW 34 Bit 0/SW 34
Bit 1

Only if the remote sender fax
is a Ricoh fax.
Register the IP address.
Register the Alias number.
Request the system administrator to
increase the bandwidth.
Lower the start modem reception baud
rate on the receiving side.
IPFAX SW06
Check whether the remote fax
cancelled the transmission.
Contact the network administrator.

The sender machine displays
this error code when the
sender fax is a Ricoh model.
39
IP-Fax Troubleshooting
SM