Ricoh M160 Service Manual page 478

[Disable Copying]
5118
This program disables copying.
5-118-001 -
[Mode Clear Opt. Counter Removal]
Sets the mode clear operation in removal of counters to all the accounting
counter devices.
Sets whether to operate the mode clear or not when the accounting
devices released (e.g. no key-card, no remains in a card) before starting a
5120
job or during idle after a job end.
If the accounting devices released during a job, the machine starts
canceling the job and then stops the counter. This SP, thus, is aimed to set
whether to do the mode clear operation if the stopped timing was during job
canceling.
5-120-001 0: Yes 1: StandBy 2: No
[Counter Up Timing]
5121 Determines whether the optional key counter counts up at paper feed-in or
at paper exit.
5-121-001 0:Feed 1:Exit
[APS Mode]
5127 Selects whether the APS function is enabled or disabled with the contact of
a pre-paid card or coin lock.
5-127-001 -
SM Appendix
[0 or 1 / 0 / 1/step]
C* 0: Not disabled
1: Disabled
[0 to 2 / 0 / 1/step]
0: Yes (removed)
C*
1: Standby (installed but not used)
2: No (not removed)
[0 or 1 / 0 / 1/step]
C* 0: Feed
1: Exit
[0 or 1 / 0 / 1/step]
C* 0: Not disabled
1: Disabled
3-65
Main SP Tables-5
M160/M161