Main Machine Installation - Ricoh M160 Service Manual

2.2 MAIN MACHINE INSTALLATION


The user maintenance model (M160) is for installation by users. However, the customer
engineer must do the installation if the sales representative requests it.

The service maintenance model (M161) is for installation by the customer engineer.
2.2.1 IMPORTANT NOTICE ON SECURITY ISSUES
In order to increase the security of the MFP, and to ensure that the customer sets the
administrator password, an administrator set/change prompt display is shown up at the first
power-up.
Overview

The following Program/Change Administrator screen is displayed at the first power-up.

When the customers set the administrator/supervisor login password, the display disappears
and the home display will appear. The customers, however, can erase this screen with the
following procedure if they think there is no need to set the password.
1. On the Program/Change Administrator screen, press [Change] next to Supervisor and
then touch [OK] without inputting any password.
2. Touch [OK] again when the Confirm password display shows up.
3. For Administrator 1, do the same procedure as steps 1 and 2.
4. Press the [OK] button, then the home display appears.

SP5-755-002 allows you to skip this screen temporarily and continue the installation
procedure without setting an administrator password. However, the Program/Change
Administrator screen appears every time you turn the power OFF/ON, if the password is not
set.
SM 2-5
Main Machine Installation
M160/M161