IEEE 1284 Interface Board Type A
2.
Fully insert the IEEE 1284 I/F board.
3.
Tighten the two screws to secure the board.
4.
Plug in the power cord, and then turn on the machine.
5.
Print the configuration page to confirm that the board was attached correctly (page
2-17 "Printing a Configuration Page").
Confirm that the IEEE 1284 I/F board was correctly installed by printing the configuration
page. If it is correctly installed, "Parallel Interface" will appear for "Device Connection" on
the configuration page.
M160/M161
2-58
SM