Ricoh M160 Service Manual page 336

Service Call
SC No. Level
SC867-00 D
SC No. Level
SC867-01 D
SC No. Level
SC868-00 D
* Do not format the SD card supplied with the main machine or sold as an option. You may only format
SD cards used for Firmware Update by the Customer Engineer.
M160/M161
Error Name/Error Condition/Major Cause/Solution
SD card removal detection
When an application SD card is removed from the slot while the
application is being activated.
An application SD card has been removed from the slot (from
the mount point /mnt/sd0).
Turn the main power switch off and on.
Error Name/Error Condition/Major Cause/Solution
SD card removal detection
When an application SD card is removed from the slot while the
application is being activated.
An application SD card has been removed from the slot (from
the mount point /mnt/sd1).
Turn the main power switch off and on.
Error Name/Error Condition/Major Cause/Solution
SD card access error
The SD controller returned an error during operation.
(An error occurred at the mount point of /mnt/sd0)

SD card is defective

SD controller is defective

Reformat the SD card (using the "SD Formatter" made by
Panasonic).*

Check the SD card insertion status.

Replace the SD card.

Replace the controller board.
6-92 SM