Ricoh M160 Service Manual page 536

5-846-041 Fill Addr Acl Info
SM Appendix
[- / - / -]
[Execute]
This SP must be executed immediately
after installation of an HDD unit in a
basic machine that previously had no
HDD. The first time the machine is
powered on with the new HDD
installed, the system automatically
takes the address book from the
NVRAM and writes it onto the new
HDD. However, the new address book
on the HDD can be accessed only by
the system administrator at this stage.
Executing this SP by the service
technician immediately after power on
grants full address book access to all
C*
users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial
data are created on the HDD
automatically.
5. However, at this point the address
book can be accessed by only the
system administrator or key
operator.
6. Enter the SP mode and do
SP5846-041. After this SP
executes successfully, any user
can access the address book.
3-123
Main SP Tables-5
M160/M161