Ricoh M160 Service Manual page 519

Main SP Tables-5
5-821-003 RCG Port
5-821-004 RCG URL Path
5824 [NV-RAM Data Upload]
5-824-001 -
[NV-RAM Data Download]
Downloads data from an SD card to the NVRAM in the machine. After
5825
downloading is completed, remove the card and turn the machine power off
and on.
5-825-001 -
[Network Setting]
5828
Job spool settings/ Interface selection for Ethernet and wireless LAN
5-828-050 1284 Compatiblity (Centro)
5-828-052 ECP (Centro)
M160/M161
[0 to 65535/ 443 / 1/step]
Sets the port number of the RCG
C* (Remote Communication Gate)
destination for call processing at the
remote service center.
[0 to 16 characters (half characters)
C*
Default /RCG/services/ -]
[- / - / -]
[Execute]
Uploads the NVRAM data to an SD
C*
card. Push Execute.
Note: When uploading data in this SP
mode, the front door must be open.
[- / - / -]
C
[Execute]
[0 or 1 / 1 / 1/step]
C* Enables or disables 1284 Compatibility.
0: Disabled, 1: Enabled
[0 or 1 / 1 / 1/step]
Displays/sets the ECP.
0: not allowed
C*
1: allowed
The 1284 mode must be allowed when
the ECP allowed.
3-106 SM Appendix