Ricoh M160 Service Manual page 542

5-849-003 Total Counter
5851 [Bluetooth]
5-851-001 Mode
[Remote ROM Update]
Allows reception of firmware data via the local port (IEEE 1284) during a
5856 remote ROM update, when the value set to "1". This setting is reset to "0"
after the machine is cycled off and on. Allows the technician to upgrade the
firmware using a parallel cable.
5-856-002 Local Port
5857 [Save Debug Log]
5-857-001 On/Off
5-857-002 Target (2:HDD 3:SD)
SM Appendix
[0 to 99999999 / 0 / 1/step]
C* Displays the total counts at the installed
date (SP5-849-001).
[0 or 1 / 0 / 1/step]
Sets the operation mode for the
C* Bluetooth Unit.
0: Public
1: Private
[0 or 1 / 0 / 1/step]
C* 0: Disable
1: Enable
[0 or 1 / 0 / 1 / -]
0: OFF
1: ON
C*
Switches on the debug log feature. The
debug log cannot be captured until this
feature is switched on.
[ 1 to 3 / 2 / 1/step]
1: IC Card
2: HDD
3: SD Card
C*
Selects the destination where the
debugging information generated by
the event selected by SP5-858 will be
stored if an error is generated.
3-129
Main SP Tables-5
M160/M161