Ricoh M160 Service Manual page 494

5-431-040 CertCrypt
5-431-050 UserLimitCount
[Authentication Error Code]
5481
Determines how the authentication failures are displayed.
5-481-001 System Log Disp
5-481-002 Panel Disp
[MF KeyCard]
5490
Sets up operation of the machine with a keycard.
5-490-001 Job Permit Setting
SM Appendix
[0 or 1 / 0 / 1/step]
Turns on or off the copy permission of
C* the authentication information for the
external authentication.
0: Not permit, 1: Permit
[0 or 1 / 1 / 1/step]
Turns on or off the copy permission of
C* the maximum number information for
the external authentication.
0: Not permit, 1: Permit
[0 or 1 / 0 / 1/step]
0: Display OFF
1: Display ON
C*
Determines whether an error code
appears in the system log after a user
authentication failure occurs.
[0 or 1 / 1 / 1/step]
0: Display OFF
1: Display ON
C*
Determines whether an error code
appears on the operation panel after a
user authentication failure occurs.
[0 or 1 / 0 / 1/step]
0: Disabled. Cancels operation if no
code is input.
C* 1: Enabled. Allows operation if another
code is input and decrements the
counter once for use of the entered
code.
3-81
Main SP Tables-5
M160/M161