Power Measurement W, Va, Var And Pf; Single-Phase Power Measurement - AEMC 607 User Manual

Clamp-on meter

Hide thumbs Also See for 607:

Table of Contents

PEAK:

Display

1st row

2nd row

3rd row

4.10 POWER MEASUREMENT W, VA, VAR AND PF

This measurement is possible in single-phase or in balanced 3-phase.

NOTE:

If performing DC or AC+DC power measurements, correct the

DC zero in current first (see § 4.8.2).

For the power factor (PF) and VA and var, the measurements possible are only

available in AC or AC+DC modes.

1. Set the switch to

2. The device automatically displays AC+DC. To select AC, DC, or

AC+DC, press the

3. Connect the black lead to the COM terminal and the red lead to

the

terminal.

Clamp-On Meter Model 607- User Manual

Quantity

Inrh

PEAK+ OR PEAK- value in A

Triggering threshold in A

and select VA, var, or PF by pressing the

button until the desired choice is reached.

Table of Contents