Programming And Starting Alarms; Displaying The Alarms Log - AEMC 8230 User Manual

5.5.1

Programming and Starting Alarms

Select the icon with the ◄► buttons.
To program the starting and stopping times:
1. With the Start field highlighted in yellow, press the Enter button to define the
starting date and time of the alarms.
• Use the ▲▼ buttons to increment or decrement a value and ◄► to
move to the adjacent item.
• Press the Enter button once the programming of the Start is completed.
2. Select the Stop field using the ▼ button and press Enter to define the ending
date and time of the alarms.
• Use the ▲▼ buttons to increment or decrement a value and ◄► to
move to the adjacent item.
• Press the Enter button once the programming of the Stop is completed.
3. Press the ▼ button again to highlight OK in yellow, then press Enter.
4. The message "Waiting to start search" will display on the screen. At the start-
ing time, the bottom of the screen displays "Search in progress".
5. At the stop time, the OK button is displayed again highlighted in yellow.
NOTE: To stop the alarm recording before the stop time occurs, select the
Hand tool by pressing the ▼ button and then the Enter button.
5.5.2

Displaying the Alarms Log

1
2
3
42
OPEN ALARM LOG
02/25/06 11:27 Vthd
Vrms
11:28
Vthd
Vthd
Arms
Arms
11:29 Arms
Arms
Arms
Vrms
02/25/06 10:26
Min 23.1% 2s
Min 0V 1s24
Min 34.3% 1s
Max 35.0% 1s
Max 1A 1s5
Min 1A 1s3
Min 0A 1s9
Min 0A 1s9
Min 0A 1s8
Min 109V 3s37
Figure 5-17
Power Quality Analyzer Model 8230
(1/2)
s
1
100
s
1
100
s
1
100
s
1
100
s
1
100
s
1
100
s
1
100
4
5