Configuring DHCP
Command or Action
Step 9
copy running-config startup-config
Example:
Switch# copy running-config startup-config
What to Do Next
After enabling DHCP port-based address allocation on the switch, use the ip dhcp pool global configuration
command to preassign IP addresses and to associate them to clients.
Monitoring DHCP Server Port-Based Address Allocation
Table 21: Commands for Displaying DHCP Port-Based Address Allocation Information
Command
show interface interface id
show ip dhcp pool
show ip dhcp binding
Additional References
Related Documents
Related Topic
DHCP Configuration Information and Procedures
OL-29048-01
Monitoring DHCP Server Port-Based Address Allocation
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Displays the status and configuration of a specific interface.
Displays the DHCP address pools.
Displays address bindings on the Cisco IOS DHCP server.
Document Title
IP Addressing: DHCP Configuration Guide, Cisco
IOS XE Release 3S
http://www.cisco.com/en/US/docs/ios-xml/ios/
ipaddr_dhcp/configuration/xe-3s/
dhcp-xe-3s-book.html
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
231