Function Keys - Siemens ACUSON Cypress Operator's Manual

Keyboard & General Controls
PATIENT CALC
SETUP VIEW
TOOLS SAVE
2-10

Function Keys

The six function keys are located at the bottom left corner of the keyboard.
Press the key to enable each function.
The Function Keys
TABLE 3.
Function Key Description
PATIENT Activates the Patient ID entry screen. This screen stores the
entries for patient name, ID number, and other data related
to the patient and the study.
Only one patient study can be active at a time. Activating a
new patient study automatically closes the previously
opened patient study. To exit the Patient screen, press the
PATIENT
COLOR
CALC Activates the measurement and analysis function. If
pressed during real-time scanning, the system will freeze the
(Calculations)
image first, then open the Calculations menu. Pressing
CALC
the screen.
Which Calculations menu is activated is determined by the
active scanning mode or what is being reviewed. For exam-
ple, if
be displayed.
SETUP Activates the Setup menu. To view the subheadings, double
click a heading. Click a subheading and the available options
are displayed in the section to the right of the subheading.
To adjust the settings, use the Trackball, <
alphanumeric keypad.
To exit the Setup screen, press the
press any scanning Mode key (except
ACUSON Cypress™ Operator's Manual
key again, or press any scanning Mode key (except
).
a second time removes the calculations menu from
is active, the -related measurements menu will
2D 2D
CALC
> key, and
ENTER
key again, or
SETUP
).
COLOR
is