Hiding The Factory-Defined List - Siemens ACUSON Cypress Operator's Manual

Repositioning Text Annotations on an Image
Select the annotation to be repositioned using the <
1.
< > cycles through the annotations on the screen).
TAB
Once the desired annotation is highlighted (turns green), use the Trackball to
2.
move the position.
Press < > to lock the annotation in place or <
ENTER
3.
ation.
Adding a User-Defined Annotation to the Text Menu
To add a user-defined text annotation to the menu, follow these steps:
While scanning, press the
1.
Click the [ ] button.
TEXT
2.
When the Annotation window opens, click <New Annotation>.
3.
Type text into the empty box.
4.
Click the [ ] button.
ADD
5.
The annotation will be saved in the text menu until it is deleted from the menu.
Deleting Text Annotations from the Text Menu
Text annotation that have been added to the menu using the <New Annotation>
option can be deleted.
To delete a text annotation from the menu, follow these steps:
While scanning, press the
1.
Click the [ ] button.
TEXT
2.
Highlight the user-defined annotation and click <
3.
multiple contiguous annotations can be deleted by first clicking on an annota-
tion and then holding down the <
For a non-contiguous set, use the <
When you are finished, click the [
4.

Hiding the Factory-Defined List

The factory-defined list of annotations can be hidden from view by removing the
checkmark from the System Annotations box. To access the System Annota-
tions box, follow these steps:
Press the
TOOLS
1.
Click the checkmark in the System Annotations box to remove the check.
2.
ACUSON Cypress™ Operator's Manual
function key.
TOOLS
function key.
TOOLS
> key and clicking another annotation.
SHIFT
CTRL
CLOSE
function key and select [
Adding Text to an Image
> key (pressing
TAB
> to cancel the oper-
ESC
>. Note that
BACKSPACE
> key.
] button.
].
TEXT
5-17