Saving Calculations To The Patient Report; Saving Frames Containing Measurement Graphics - Siemens ACUSON Cypress Operator's Manual

Vascular Calculations
7-10

Saving Calculations to the Patient Report

After each measurement or sequence of measurements is completed, the
results of any calculation that uses the measurements as input are displayed. To
save the results and close the menu, click [
If you are not satisfied with a specific result, you can redo the measurement
again. To keep the menu open, but clear all the results currently displayed, click
[ ]. To cancel the current calculation and close the menu, click
CLEAR
[ ].
CANCEL
When you have completed all your calculations and are satisfied with the
results, to save the measurements (and close the Report Menu) click [
Results can be viewed at any time by activating the patient study and then click-
ing the Report tab.
To Delete a Single Measurement from a Report Menu
Highlight the measurement with the cursor.
1.
Press the <
BACKSPACE
2.
ated measurements.

Saving Frames Containing Measurement Graphics

After each measurement or sequence of measurements is completed, the frame
used to perform the measurement can be saved along with the graphics. While
the frame and graphics are displayed, press
briefly appear in the upper right corner of the screen to indicate the frame has
been saved as part of the study.
If the frame used to perform the measurement is part of a loop that has already
been saved as part of the study, pressing
graphics and index to the frame. The camera icon will briefly appear in the
upper right corner of the screen to indicate the graphics have been added to the
frame. The graphics can only be viewed by using the Main knob to search for
the frame.
ACUSON Cypress™ Operator's Manual
].
OK
> key to remove that measurement and any associ-
Q SAVE
Q SAVE
OK
. The camera icon will
will add the measurement
].