Siemens ACUSON Cypress Operator's Manual page 106

Scanning
5-16
Using the Text Function
To add text labels to images, follow these steps:
While scanning, press the
1.
Click the [ ] button.
TEXT
2.
When the Annotation window opens, click either an existing label or <New
3.
Annotation>. If you select <New Annotation>, type text into the empty box.
Click the [
POSITION
4.
The text will be affixed to an arrow that can be moved around the screen
5.
using the Trackball. When the label is positioned where you want it, press
< >.
ENTER
When you are finished, click the [
6.
The new annotation will be saved in the text menu until it is deleted from the
7.
menu.
Removing Text Annotations from an Image
There are two methods of removing text annotations from an image.
To remove one or more text annotations from an image using the TOOLS menu:
While scanning, press the
1.
Click the [ ] button.
TEXT
2.
Remove the text:
3.
To delete a single annotation: In the annotation list, highlight the annota-
tion to be erased from the screen and click [
being deleted appears on the screen more than once, the annotation
placed last will be the first erased.
To delete all the annotations: Click [
When you are finished, click the [
4.
To remove one or more text annotations from an image using the Quick Text:
Select the annotation that is to be deleted using the <
1.
<TAB> cycles through the annotations on the screen).
When the desired annotation is highlighted, press <
2.
ACUSON Cypress™ Operator's Manual
function key.
TOOLS
] button in the Annotation window.
] button.
CLOSE
function key.
TOOLS
ERASE ALL
] button.
CLOSE
]. If the annotation
ERASE
].
> key (pressing
TAB
> to delete it.
BACKSPACE