Keyboard Controls; Mode Keys - Siemens ACUSON Cypress Operator's Manual

C
2D
M
qSAVE

Keyboard Controls

Mode Keys

The Mode keys include
(Continuous Wave Doppler),
PW
(Quick Save). Each is described in Table 1.
CW
The Mode Keys
TABLE 1.
Mode Key Description
2D The
default imaging mode. When other scanning modes are
active, or when a menu is active, pressing the
the system to full-screen
M M-Mode operates the time-motion scanning mode. Pressing
(M-Mode)
M
Trackball. Once the cursor has been placed on the desired
portion of the 2D image, pressing
the time-motion sweep. The
motion sweep to the real-time image. To exit M-Mode, press
2D
Pressing the
COLOR
(Color Flow within the
Mapping) adjusted by moving the Trackball. The
ON/OFF
Note that Color can only be turned
in either full-screen or split-screen displays. Color flow map-
ping does not operate in M-Mode.
CW The
(Continuous
Pressing
Wave
the Trackball. Once the cursor has been placed on the
Doppler)
desired portion of the 2D image, pressing
activates the CW Doppler spectral display. The
toggles from the CW display to the real-time 2D image. To
exit the CW Doppler mode, press
ACUSON Cypress™ Operator's Manual
, (M-Mode),
2D M
(Pulsed Wave Doppler),
PW
mode key activates
2D
activates the M-Mode cursor, which is moved using the
.
key activates color flow mapping mode
COLOR
image. The location of the color may be
2D
; to turn color flow
key activates Continuous Wave Doppler mode.
CW
activates the CW cursor, which is moved using
CW
(Color Flow Mapping),
COLOR
FREEZE
mode imaging. This is the
B
imaging mode.
2D
a second time activates
M
key then toggles from time-
M
COLOR
, press the
OFF COLOR
when
ON/OFF
CW
.
2D
Keyboard Controls
CW
, and
Q SAVE
key returns
2D
key toggles
key again.
is active
2D
a second time
key then
CW
2-3