Completing A Study With No Patient Name; Using Existing Studies; Adding Data To An Existing Study - Siemens ACUSON Cypress Operator's Manual

Patients
4-18

Completing a Study with No Patient Name

If you conduct a study without entering a patient's name, the patient is labeled
"Unknown". The system can have any number of Unknown patients. They will
each be listed separately with the date and time of the study.
To update the Unknown entry with patient information, follow these steps:
Press the
PATIENT
1.
Highlight the correct Unknown patient. Be careful to check the date and time
2.
information to get the right study.
Click the [ ] button.
EDIT
3.
Use the Trackball or <
4.
fields and type the new information.
Click [ ] to save the changes.
OK
5.
To exit, press .
2D
6.

Using Existing Studies

Adding Data to an Existing Study

To add additional loops to an existing study, follow these steps:
Press the
PATIENT
1.
Scroll through the directory by positioning the Trackball on the up or down
2.
arrow and pressing <
Highlight an existing study under the patient's name and click [
3.
Press to exit the Setup screen and return to the
2D
4.
to return to the
SETUP
Save loops using
5.
All loop saves are added to the selected study.
6.
ACUSON Cypress™ Operator's Manual
function key to display the Patient/Study list.
> key to move the cursor to the patient information
TAB
function key to display the Patient/Study list.
> or by turning the Main knob.
ENTER
display.
2D
or (see "Saving Image Data" on page 5-5).
•SAVE Q SAVE
ACTIVATE
display or press
2D
].