Adding An Arrow When Quick Text Is Enabled; Adding An Arrow When Quick Text Is Not Enabled; Removing An Arrow - Siemens ACUSON Cypress Operator's Manual

Quick Text Notes:
Use the spacebar to end auto-find.
Once the Quick Text function has been activated by pressing an alphanu-
meric key, pressing <
into position will be deleted.
The Quick Text function is not available in the following cases: while the Calc
package is open, when the Tools menu is displayed, and in a Patient or Setup
menu or submenu.
Annotations cannot be added to a Quad screen.
Annotations are not displayed in the Quad screen format.
Press the < > key to exit any function.
ESC

Adding an Arrow when Quick Text is Enabled

Press the <
RETURN
1.
on the screen.
Use the Trackball to move and position the arrow.
2.
Press < > to rotate the arrow in a clockwise direction in 45° incre-
RETURN
3.
ments.
When the arrow is correctly positioned, press the <
4.
beside the Trackball) to anchor the arrow.

Adding an Arrow when Quick Text is Not Enabled

Press the
TOOLS
1.
Click the arrow button to display the on-screen arrow.
2.
Use the Trackball to position the arrow on the screen.
3.
Press the <
RETURN
4.
increments.
When the arrow is correctly positioned, press the <
5.
beside the Trackball) to anchor the arrow.

Removing an Arrow

Make sure that the text Annotation window is closed.
1.
Press the < > key until the arrow is highlighted (if there is more than one
TAB
2.
annotation on the screen the <
Press the <
BACKSPACE>
3.
ACUSON Cypress™ Operator's Manual
> deactivates Quick Text. Annotations not locked
ESC
> key on the alphanumeric keypad to display an arrow
key and click [ ] to open the Annotations window.
TEXT
> key to rotate the arrow in a clockwise direction in 45°
> key cycles through each).
TAB
key to remove the arrow.
Adding Text to an Image
> keys (located
ENTER
> keys (located
ENTER
5-19