Viewing The Quad-Screen Display - Siemens ACUSON Cypress Operator's Manual

Viewing the Quad-Screen Display

To view the quad-screen display, follow these steps:
Press the function key to see saved loops in a full-screen display.
VIEW
1.
Press again to display the loops in a quad-screen format. The
VIEW
key toggles between the two display formats. Press
To view additional quad pages, turn the
2.
To highlight a quad, turn the
3.
To display a full-screen loop with the
To view the other saved loops, turn the
Each quad will display the number of loops saved and the currently dis-
played loop in the upper left corner of each quad. For example, "
cates that the second of four saved loops is currently displayed.
To change the playing speed of the loop, turn the Main knob to select from
4.
Normal, Slow, and Slower.
The Loop Length Bar
The Loop Length bar (the yellow bar located in the upper right corner of each
quad) represents the length (in frames) of the currently displayed loop. The bar
has two vertical bars: a Start marker and an End marker.
THE START MARKER
WHEN START IS DISPLAYED
ON THE SOFT WINDOW MENU,
TURN THE KNOB CLOCKWISE
TO REMOVE FRAMES FROM
THE START OF THE LOOP.
See Figure 39 on page 8-24 for more details.
ACUSON Cypress™ Operator's Manual
VIEW/STAGE
Soft Window knob.
SEL QUAD
, press
ECG
NEXT LOOP
THE END MARKER
WHEN END IS DISPLAYED ON
THE SOFT WINDOW MENU,
TURN THE KNOB COUNTER-
CLOCKWISE TO REMOVE
FRAMES FROM THE END OF
THE LOOP.
Labeling Views
VIEW
to exit View mode.
2D
Soft Window knob.
.
VIEW
Soft Window knob.
indi-
2/4"
8-23