Starting A New Study - Siemens ACUSON Cypress Operator's Manual

Starting a New Study

If the patient being examined is already in the system Patient/Study list:
Press the
PATIENT
1.
Scroll through the list by positioning the cursor on the up or down arrow and
2.
pressing < >
ENTER
When you have found the appropriate patient, use the Trackball and
3.
< > key to highlight the patient name.
ENTER
Click the [
NEW STUDY
4.
patient.
If desired, enter a new Height, Weight, Blood Pressure, Study Indication,
5.
or Accession # and select the Protocol by clicking on the arrow to display
the drop-down menu and highlighting the protocol.
Click [ ].
OK
6.
To save the information and return to the
7.
If the patient being examined is not in the system:
See "Adding and Editing Patients and Studies" on page 4-9.
ACUSON Cypress™ Operator's Manual
function key to display the Patient/Study list.
or by turning the Main knob
] button to start a separate and new study for this
Adding and Editing Patients and Studies
.
display, press or
2D 2D
.
SETUP
4-15