Sending The Studies - Siemens ACUSON Cypress Operator's Manual

Sending the Studies

To transfer studies, follow these steps:
Press the
PATIENT
1.
NOTE Click the toggle button located on the left side of the screen to
display the desired list.
Select the study/studies to be transferred (see "Selecting Studies" on page
2.
9-14 for details on how to select studies).
To display the set up screen, click the [
3.
the patient/study list. Use this screen to select the destination, data to be
included in the transfer,
study from the Cypress system hard drive upon completion of the transfer.
Multiple formats and destinations can be selected at the same time. The
three type of formats are Cypress, DICOM, and Multimedia.
NOTE To remove the check marks from the destination area, click the All or
Destinations radio button, and then click [
Patient
Cypress Format
Archives
DICOM Format
Archives
Multimedia Format
Archives
The Send Screen
FIGURE 43.
ACUSON Cypress™ Operator's Manual
key to display either the Patient List or Study List.
SEND
compression, and to automatically delete the
DICOM
Setup Reports
Images
Entire Study
Only flagged loops
Report
Tabular (Cardiac)
Images
Entire Study
Only flagged loops
Report
Images
Entire Study
Only flagged loops
Transferring Studies
] button located to the right of
].
CLEAR
Shutdown
OK
Cancel
All
Clear
Destination
DICOM Compression
None
RLE Lossless
JPEG Lossy
JPEG Compression
Low High
Remove Name, ID from
Images
Remove study after
transfer
9-17