Stress Echo Ecg Cables And Connectors - Siemens ACUSON Cypress Operator's Manual

If the is not displayed at the bottom of the screen, press
ECG
5.
play the Setup menu and then double-click the Setup tab. Highlight the
subtitle and click the box next to
remove the display, click the box once again to remove the check mark.
ECG
When you press a Mode key (e.g.,
6.
ning, the waveform will be displayed. It is normal for the system to take
ECG
a few moments to automatically adjust gain levels before displaying the
waveform. The triggers will automatically appear on the R-wave or each car-
diac cycle. They can be turned off only by turning off the

Stress Echo ECG Cables and Connectors

All of the adapters described in this section are included in the Stress Echo
option package.
Stress Echo ECG Connectors
Siemens ships a variety of connectors with every Cypress Stress Echo option
package. This ensures that the Cypress system can be properly connected to
most stress systems.
ACUSON Cypress™ Operator's Manual
Connecting and Using ECG
to enter a check mark. If you want to
ECG
) in order to return to real-time scan-
2D
to dis-
SETUP
ECG
ECG
ECG.
8-3