Deleting A General Measurement; Deleting A Specific Measurement; Making Corrections To The Trace And Area Measurements - Siemens ACUSON Cypress Operator's Manual

Deleting a General Measurement

To delete a general measurement, follow these steps:
Display the frame containing the measurement graphic.
1.
Press to display the Selection Menu.
CALC
2.
Use the Trackball to highlight the measurement you want to delete.
3.
Press the <
BACKSPACE
4.

Deleting a Specific Measurement

To delete a specific measurement, follow these steps:
Display the frame containing the measurement graphic.
1.
Press to display the Selection Menu.
CALC
2.
Use the Trackball to select the name of the Report Menu containing the spe-
3.
cific measurement you want to delete and press <
NOTE Specific measurements cannot be deleted from the Selection Menu.
To delete a single measurement, use the Trackball to highlight the measure-
4.
ment you want to delete and press <
surements, click [
CLEAR
NOTE If the deleted measurement is part of a formula, all the formula results
that use that measurement are also deleted.

Making Corrections to the Trace and Area Measurements

No matter which method you choose to use to perform the measurements, cor-
recting the Trace or Area outline is the same. Press the <
erase a small portion of the outline. Press and hold the <
continuously erase the path of the cursor until the <
released.
ACUSON Cypress™ Operator's Manual
Using the Vascular Calculations Package
>> key.
BACKSPACE
].
>.
ENTER
>. To delete all of the mea-
> key to
BACKSPACE
> key to
BACKSPACE
> key is
BACKSPACE
7-11