Activate The M-Mode Display; Main Knob Controls Gain And Compress - Siemens ACUSON Cypress Operator's Manual

Activate the M-Mode Display

To activate the M-Mode time/motion display, follow these steps:
1.
M
2.
3.

Main Knob Controls Gain and Compress

When you press the
If you press
are Compress and Gain. Press
TO SWITCH
BETWEEN are controlled by the Main knob. Press the Main knob to toggle between the two
COMPRESS AND
active options.
GAIN, PRESS
THE MAIN KNOB
In Freeze mode, turn the Main knob to scroll through the frames.
ACUSON Cypress™ Operator's Manual
Press the mode key once. The
M
assigned to the M-Mode cursor line.
Position the cursor in the desired portion of the image, and press the
key a second time. This freezes the
time-motion display.
Pressing again toggles between the active time-motion display and the
M
real-time sector image. You can also re-position the M-Mode sample while
the image is frozen. The sample line in the
2D
image remains frozen.
NOTE The shallowest 10% of the scanning depth (nearest the transducer
face) is not displayed. For example, if a scanning depth of 16.2 cm is
selected, the shallowest 1.6 cm is not displayed.
mode key two options appear—Compress and
M
again the spectral display becomes active and the two options
M
Compress Adjusts the presentation of the
Dynamic Range settings. The current setting is shown in the upper left por-
tion of the screen.
Gain (the system default) Displayed when
2D
clockwise to increase the overall amplification of the
counterclockwise to decrease.
Gain Displayed when the time-motion display is active. Turn the knob clock-
wise to increase the overall amplification of the M-Mode data. Turn counter-
clockwise to decrease.
sector is live and the Trackball is
2D
image and activates the M-Mode
2D
2D
again to make active again. The options
M 2D
image by changing the
2D
is active. Turn the knob
2D
M-Mode Scanning
mode
M
image moves but the
Gain.
2D
image data. Turn
2D
2D
5-51