Reading Native Cypress System Format Studies From The Mo Disk - Siemens ACUSON Cypress Operator's Manual

Transferring Studies
9-24
Formatting a Disk Using the System Utilities
To format a disk using the system utilities, follow these steps:
Press and then click the Shutdown tab.
SETUP
1.
Click [ ].
UTILITIES
2.
When the Utilities menu opens, click [
3.
Insert the disk and then click [
MO
4.
The Format Dialogue box opens. Complete the settings (see Table 45).
5.
Click [ ]. A warning will appear to inform you that
START
6.
erased from the disk.
Click [ ]. A prompt will appear indicating the formatting procedure is com-
OK
7.
plete.
Click [ ] and then click [
OK
8.
Note that you cannot format another disk without first closing the Format Dia-
9.
logue box. If you do not close the dialogue box, the format will fail. To format
multiple disks at one time, repeat the steps as outlined above.
When finished formatting, click [
10.
returns to the screen.
2D
Reading Native Cypress System Format Studies from the MO
Disk
To read a study from an
Insert the disk into the
MO
1.
reads the disk and lists the studies in the patient directory under the
heading. Studies saved in the
the study; studies saved in the
overlaying a gray icon.
View a study. Studies saved in the
2.
the Cypress system by highlighting the study and then clicking the [
] button.
VATE
NOTE Studies stored in the
Cypress system for viewing.
ACUSON Cypress™ Operator's Manual
MO DISK FORMAT
RUN SELECTED
] on the Format Dialogue box.
CLOSE
] on the Utilities menu and the system
CLOSE
disk, follow these steps:
MO
drive. The Cypress system automatically
MO
format have a gray icon in front of
CYPRESS
format have a blue circle and line
DICOM
MO CYPRESS
format cannot be copied back to the
DICOM
].
].
data will be
ALL
MO DISK
format can be viewed on
ACTI-