Activate The Color Flow Display; Main Knob Controls 2D And Color Gain - Siemens ACUSON Cypress Operator's Manual

Activate the Color Flow Display

To activate the color flow display:
1.
C
Main Knob Controls
When you press the
Gain. They are controlled by the Main knob. Press the Main knob to toggle
between the options.
TO SWITCH
BETWEEN
2D AND COLOR
GAIN, PRESS
THE MAIN KNOB
In Freeze mode, use the Main knob to search frame-by-frame or to set the play-
back speed.
ACUSON Cypress™ Operator's Manual
Press the mode key once. The Trackball controls the position of the
COLOR
color sector.
NOTE The display must be active to use Color Flow mode.
2D
NOTE Once color flow is acquired in active
turned /
OFF ON
NOTE The shallowest 10% of the scanning depth (nearest the transducer
face) is not displayed. For example, if a scanning depth of 16.2 cm is
selected, the shallowest 1.6 cm is not displayed.
COLOR
Gain Turn the knob clockwise to increase the overall amplification of the
2D
image data. Turn counterclockwise to decrease.
2D
Color Gain Turn the knob clockwise to increase the overall amplification of
the color flow image data. Turn counterclockwise to decrease.
in review mode and freeze mode.
and Color Gain
2D
mode key two options appear—2D Gain and Color
Color Flow Scanning
, the color display can be
2D
5-31